How to Cut Railroad Ties

So you want to know how to cut railroad ties, include the best way to cut railroad ties. If you’ve ever used railroad ties for a project, you know they’re heavy duty. However, this also makes railroad ties difficult to cut. You’ll need a chainsaw, a circular saw, and/or a reciprocating saw like a Sawzall to get railroad ties down to the size you need. We have what you need to know about cutting railroad ties, including safety precautions.

Table of Contents

How to Cut Railroad Ties

Railroad ties are the wooden, rectangular supports in railroad tracks. They are sturdy, last a long time, and are resistant to rot and insects. Railroad ties can be used for yard projects like building a retaining wall. In this case, you’ll probably want to cut them to size.

There are a few different ways to cut railroad ties. But, above all else, keep your safety in mind. In the instructional videos below, you’ll notice that no matter what method is used, the workers are wearing protective gear. This includes closed-toed shoes, hearing protection, eye protection, long pants, a facemask, and gloves.

Railroad ties are often covered in creosote, a dark brown, oily compound that acts as a wood preserver. While creosote is great at preserving railroad ties — which are exposed to all types of weather — it’s extremely toxic. In fact, if you get creosote on your skin or inhale it, it can cause burns, eye damage, and/or rashes. If you’re exposed to it in large doses, you could end up with liver or kidney failure, convulsions, or even death, according to the Department of Health and Human Services. Because of this, you may not want to use railroad ties for something like a vegetable garden, as the creosote may leach into the soil and produce. For other projects, after you have taken the necessary precautions, try one of the three methods below to cut railroad ties.

Chainsaw (The Best Way to Cut Railroad Ties)

The fastest — and best — way to cut railroad ties is with a chainsaw. Yes, by far the best way to cut railroad ties is with a chainsaw. Though be aware it will take frequent sharpening. But overall, cutting railroad ties with a chainsaw is as easy as it gets. This method is demonstrated in this video:

In the video, you’ll notice that the man cutting the railroad ties has the ties elevated off the ground — if you don’t do this, your chainsaw will hit the ground and kickback at you, which could result in injury. The key here is to go slow and use a kind of rocking motion when cutting. You may also want to enlist the help of a friend to hold the railroad ties, as seen in the video. This is not entirely necessary though.

Circular Saw and Reciprocating Saw

If you don’t have a chainsaw, you can use a circular saw and reciprocating saw to cut railroad ties, as seen in this video:

In the video, you’ll notice that — like when using a chainsaw — the railroad tie needs to be elevated. And because you’ll first be making cuts around the outside of the tie, you’ll want to mark your cutting lines using something like a carpenter pencil and a Speed Square Layout Tool. After you’ve marked your tie, use the circular saw to cut around all four sides of the tie. After that, starting from the bottom of the tie, use the reciprocating saw to cut through the rest of the tie.

Reciprocating Saw (Sawzall)

Alternately, you can skip the circular saw and just use a Sawzall, as demonstrated in this video:

In the video, you’ll notice that the tie is elevated by another tie. You can use this method or elevate the tie on both ends — like in the previous videos. Once the tie is elevated, proceed by cutting down through the railroad tie using the same kind of rocking motion you would use with a chainsaw.

Other Railroad Tie Cutting Options

Because most railroad ties are covered in creosote, places like The Home Depot, Lowe’s, and Menards won’t cut them for you because it’s a liability risk. However, a local lumber yard may be willing to help. Search for a lumber yard near you and call to ask.

Another option is to rent a saw from your local Home Depot or a Menards near you (Lowe’s doesn’t rent tools). Rental prices will vary by location, but for tool availability, see below:

The Home Depot

• Chainsaw rental: Yes
• Circular saw rental: No
• Reciprocating saw rental: No
• The Home Depot’s tool rental page

Menards

• Chainsaw rental: No
• Circular saw rental: No
• Reciprocating saw rental: Yes
• Menards’ rental equipment page

In Summary

Railroad ties are great to use for projects because they’re sturdy and are resistant to rot and insects — but this also makes them difficult to cut. Now you know how to cut railroad ties. Cutting railroad ties takes some effort, that’s for sure. However, if you own — or can rent — a chainsaw, a circular saw, and/or a reciprocating saw, you should be able to get the job done. Be sure you wear the appropriate safety gear and take precautions for your health.

To have the satisfying result of cutting railroads our today’s post how to cut railroad ties because Railroad ties are one of the toughest, well-made, and elongated structure resources that we can employ our effort.

Nevertheless, cost always comes along with the issues of durability and strength. If you’ve ever worked with them in the past, you already know how difficult they can be to work.

At first glance, it may seem difficult in completion, but when you start and continue with patience, it will not be that tough. It is normal to become frightened to work with all kinds of large parts of the wood. It seems to you most robust work as a beginner, but when you go through with proper patience gradually, you will get the courage.

How to Cut Railroad Ties with Three Easy Steps

We believe in every step you would be adjusted in this work if you follow our tips given in this guideline on how to cut railroad ties. A kind of self-assurance will come to boost your motivation.

Things we need

Cutting railroad ties is painstaking. But we need only a few tools, though it must be with good quality, for how to cut railroad ties.

• At first, you need a chainsaw fixed with carbide slanted. It can be electric or gas-powered.
• A sharpener for a chainsaw,
• Two pieces of raw wood.
• Sketches
• Protection for hearing
• work gloves and closed boots
• a measurement tap
• Chainsaw blokes,
• safety glasses,
• long stretchy trousers

Warning needs to maintain for this venture:

Before starting the task, we have to know and take caution on some vital issues and considerations.

• At first, prepare your mind that it has lots of works of hand.
• There will be lots dealings with the massive rocks and woods, so we must be careful while lifting those.
• As railroad tiles are covered with materials like creosote, usually, it makes the surface slippery. So, there lies a little bit of danger while doing work with this.
• Even these constituents are not safe for your skin, eyes, or lungs when you contact them.so before going to those pieces of stuff, you must put gloves and safety glass.
• Railroad ties are contained with grit, concrete, and rocks like things. Working with these materials needs a little bit of patience. Hurriedness can spoil your effort.
• We need to remember for the pebbles inside the railroad tie, it may create a wreck in the chain.
• If you need multiple cuts, sharpen the chain intermittently for sparkling finishing.

Three easy steps for the success of cutting railroad ties

Step 1: planning of the place

At first, we need to take the preparation for the area where we are aimed at having the procedure complete. For more suitability, we should pick a place which is as adjacent as possible. Because here we are to going to provide our tips to get the work carried out. Be sure that the ground is even.

We will put the distance around three feet between them. And lay the two large pieces of raw wood first. After that, place the railroad tie what we want to cut between two parts. These will work as advancement to the tie. It will make the cutting stress-free for you. And make it turn them off from being jammed when you cut them.

Step 2: measuring for your new edifice

When you are thinking to accomplish this scheme, it would be wise to stick with your firm thought. So, we must not think to avoid this part. For any perfect work, measuring of the area is the vital point for completion of the task.

When we cut the railroads, we require the measurement tape and chalk to precisely measure the wood. After that, we also need to mark the cut parts which are necessary for the railroad ties. This portion of work is needed while you are thinking of having the new edifice.

Step 3: the final job of cutting the railroad ties

Before we start to cut the ties, think again, scrutinize again that you are doing the right way, and take enough safety properties. Be sure that you have taken the full coverage suits, proper shoes, safety glasses, protection for the hearing side, and gloves. As it is mentioned before, creosote is dangerous things. So we must not take any risk.

When we are fully set, we will fire up our chainsaw for the first cut. Here we maintain the carefulness. Now go straight and cut the tie around ¾ of the total gravity.

Now take the chainsaw out and finish the cutting by from the above to the under the tie. After doing it would help evade the chain from fastening. While you are cutting the ties, keep the utmost carefulness!

Railroad ties often have pebbles, tiny stones, and granule sands, and so many different hard objects stuck around. And these are the obstacles of the task which can disturb the cutting path of the chainsaw. So here, we must work bit by bit and gently. Be watchful in every stroke that any problem may not hinder.

Final thoughts

Railroad ties display more or less few exclusive experiments that appear challenging to accomplish by general people. To make it easier and possible, we give flexible guidance in this post on how to cut railroad ties.

So the task is not impossible that you assumed. Through patience, all safety apparatus, a reliable chainsaw, and the exact belief in yourself, you can make it possible. Even you will be able to know all the issues related to railroad ties.

You need to maintain the guidance we offered here. For a satisfying result, you can practice more than one time. It will enhance your courage and confidence.

Related Articles

• How to Fix Cracks in Window Casings
• How to Repair Cracked Concrete on a Stamped Driveway
• How to Seal a Cracked Fiberglass Bathtub
• How to Fix a Crack in a Fiberglass Hot Tub
• DIY Whipped Shea Butter

Railway ties may be a strong, durable material for retaining walls, outdoor steps or other landscaping projects, but they’re not totally exempt from wearing down. When cracks or splits are in your railway ties, use a wood filler product to seal those openings. As with all projects that involve wood treated with creosote — as railway ties generally are, take extra precautions to protect your health.

Wear long pants, a long-sleeved shirt and closed-toe shoes as well as rubber or plastic gloves and a dust mask. Squeeze a dab of a wood filler kit’s cream or putty material onto a piece of shiny cardboard. The dab should be large enough to fill one small crack in a railway tie.

Squeeze a line of the wood filler kit’s hardener gel onto the dab of cream or putty, applying the amount appropriate for the amount of cream or putty on the cardboard. The instructions on the side of the hardener gel or on the cream or putty container should describe the appropriate proportion to use.

Slide a disposable trowel or other tool across the top of the cardboard’s cream or putty and hardener gel to allow the two materials to mix. Sweep the trowel or other tool across the two materials several times to blend them, but the hardener gel doesn’t need to mix completely with the cream or putty. It’s OK for the hardener to be visible in the mixture.

Scoop the cardboard’s mixture with your trowel or other tool, and slide it into one of the railway tie cracks. Continue scooping the mixture into the crack until it is filled and a little bit of the mixture extends outside the crack.

Smooth the outside portion of the filled crack with the trowel or other tool, making a level surface. The railway tie is probably quite rough, and so you don’t have to make the surface completely smooth, just flush with the surrounding part of the railway tie.

Wait for the mixture to dry in the repaired crack. The mixture may require only 20 minutes or a longer time period to dry. Check your wood filler kit’s instructions for the product’s drying time.

Repeat the procedure to fill other cracks in the railway ties.

Spray dark-brown spray paint over the filled areas after they’re dry if you want them to blend with the railway ties’ coloring.

Things Needed

• Long pants
• Long-sleeved shirt
• Closed-toe shoes
• Rubber or plastic gloves
• Dust mask
• Wood filler kit
• Shiny cardboard
• Disposable trowel or other tool
• Dark-brown spray paint (optional)

Warnings

• According to the U.S. Environmental Protection Agency, creosote is a potentially harmful chemical. The EPA recommends not allowing creosote materials to touch skin. So don’t overlook safety precautions; wear gloves and other protective clothing.

• Some people sand over the wood filler once it is dry, allowing for an even, smooth finish. On railway ties, however, that task is not really necessary.

References

• U.S. Environmental Protection Agency: Preliminary Risk Assessment for Creosote
• The Family Handyman: How to Repair Rotted Wood

Photo Credits

• Hemera Technologies/ Images

About the Author

Nicole Vulcan has been a journalist since 1997, covering parenting and fitness for The Oregonian, careers for CareerAddict, and travel, gardening and fitness for Black Hills Woman and other publications. Vulcan holds a Bachelor of Arts in English and journalism from the University of Minnesota. She’s also a lifelong athlete and is pursuing certification as a personal trainer.

Related Articles

• How to Lay Landscaping Fabric Behind a Retaining Wall
• How to Build Window Boxes Out of Pallets
• How to Tie Landscape Timbers to Gather Them
• How to Build Tomato Teepees
• How to Transplant Butternut Squash

Railroad ties work well for retaining walls and edging, but creosote, a black, tar-like wood preservative, can leach into ground water and kill plants. Instead of risking your health with creosote railroad ties, you can replace the railroad ties landscape timbers, but you must first remove the old railroad ties. Removal usually involves digging, cutting and lifting, depending on the way the ties were used. Bulky railroad ties are often partially buried and connected to other ties with rebar when used in retaining walls. Sometimes a single course of railroad ties is used as an easy border for flower beds.

Locate the entry holes for the steel rebar that holds railroad ties together in a retaining wall.

Mark the railroad tie with a straight line about 6 inches out from each side of the rebar entry holes, dividing each rebar location into 12-inch lengths.

Cut through the top railroad tie along the lines on each side of the rebar holes. Use a reciprocating saw that allows you to change the blade position to efficiently cut through the large square wood.

Lift the 12-inch sections of railroad tie up over the rebar; you should be able to move one section by yourself instead of needing helpers to move whole railroad ties. Wedge a pry bar under the railroad tie, if needed, to help lift it off the rebar.

Remove the remaining loose pieces of wood on top of the railroad tie; all the sections should be gone from the middle of the railroad tie at this point.

Pick the soil away from the ends of the top railroad tie on the retaining wall, using a mattock, shovel or similar digging tools. The ends of the railroad ties should be set in the soil to help anchor the wall. Pull the end pieces off the wall after removing the soil.

Remove each course of railroad ties from the retaining wall, starting with the top courses and working your way to the bottom railroad tie. Depending on the retaining wall construction, additional railroad ties might be anchored in the soil perpendicular to the retaining wall. Dig out the soil around these anchor ties in order to remove them.

Related Articles

• Framing a Wooden Lattice
• How to Install Landscape Ties
• How to Make a Strawberry Planting Box
• How to Install Crown Molding for Staggered Cabinets
• How to Install Landscaping Timbers for Staggered Edging

Landscape ties, also called landscape timbers or railroad ties, are thick pieces of lumber you can use to create raised flowerbeds or attractive edging. They often remain unpainted, letting the natural weathering process fade them to a natural gray to bring a touch of country whimsy to your garden. Forming them in the right shape for your landscaping often means cutting the ends at an angle.

Standard Miter Cut

Cutting the ends of the landscape ties at 45-degree angles allows you to join the corners in an attractive and secure fashion, if you’re going for a square or rectangle shape. Landscape ties are thick, often 6 inches by 6 or 8 inches, and long, usually 8 feet. These big pieces of lumber won’t always fit on your table saw, but you can find large miter boxes at home improvement stores. Find one that can fit the largest side of your timber so you can cut the wood in any direction. Unless you have a table large enough to support the entire landscape tie, it’s best to cut on the ground with a handsaw so the wood can’t move or fall.

Miter Saw

If you have or can rent a high-end miter saw that’s capable of cutting the thick pieces of timber, it’s going to save you a considerable amount of time and sweat compared with cutting the angles by hand. Just set it to the desired angle and push it through the timber. However, the table is often a problem. Landscape timbers weigh much more than standard lumber, so they need to be supported along their entire length while you cut. Propping the timber on several sawhorses may help, or you can use an extra-long work table. Clamp the timber to the saw table, if possible, for extra security.

Different Shapes

You can design more than squares and rectangles with landscape ties, including octagon or circular shapes. These require a bit more planning to get the angles right, but the different shapes can add a new element to your yard design. It’s a good idea to draw the shape on paper first, marking the necessary angles. For example, if you want a circular shape, start with the number of degrees in a circle: 360 degrees. Divide that by the number of landscape ties you plan to use. If you’re using six pieces of timber to make the circle, each cut will need to be 60 degrees. However, you actually make the reverse angle of each cut — a straight cut is 90 degrees, so subtract 60 from 90 to get 30 degrees. Set your miter saw or miter box to 30 degrees, and cut both ends of the timbers so there’s a long and short side on both ends. This removes 30 degrees and leaves a 60-degree angle on the ends. When you put the pieces together like a puzzle, you end up with a circle.

Alternative to Cutting

If your goal is a square or rectangle shape, you might be able to get by without cutting the timbers by butting them next to each other. When you lay them out, place the side pieces inside the front and back pieces so that the outside edges form a straight line. You can attach these using corner angle brackets that you screw into two pieces at a time. This is a more rustic, unfinished look, but it also gives you the edging or flowerbed you want without any cutting.

Related Articles

• How to Build Landscape Timber Steps
• How to Create a Waterfall With a Flexible Pond Liner
• How to Stack Pavers
• Steps DIY: Instructions for Outdoor Railroad Ties
• How to Create a Raised Flower Bed Using Railroad Ties

Sturdy and rot-resistant railroad ties work well for turning a steep slope in your yard into an attractive and safe garden staircase. Railroad ties are typically coated in creosote to protect the wood and prevent rot. The chemicals can leach into soil, so you shouldn’t install railroad tie stairs near an edible garden. Alternatively, you can use 5- to 6-inch diameter, landscape timbers cut from a naturally rot-resistant wood such as the heartwood of cedar or redwood. The stairs are dug directly in the hillside from the base to the top.

Cut three railroad ties for the first step, making one tie equal to the desired width for the stairs and two ties twice as long as the desired depth for each stair tread. The treads should measure about 1 to 2 feet deep to provide plenty of room for feet to safely step and climb the stairs. You’ll need three railroad tie pieces for each additional step in the stairs, each fitting the same measurements as the first three ties.

Dig out the base of the hill to about 5 inches deep, making the space as wide as the desired width for the stairs. Cut into the hillside far enough to accommodate the total length of the two side railroad ties.

Fill in the excavated space with 4 inches of crushed rock and pack it tightly with a hand tamper. Spread a 1-inch layer of sand level over the rock base to provide a sturdy, well-draining base for the first step.

Set the three railroad ties on the sand base layer. Drive a 12-inch timber screw through the sides of the two railroad ties on the side; these screws drive into the third railroad tie to hold the three ties together in a “U” shape.

Dig out the hillside far enough to accommodate the length of the side railroad ties, beginning from the center of the side railroad ties on the coarse below. If the treads are to be 24 inches deep and the railroad ties are 48 inches long, you’ll need to dig 48 inches into the hillside beginning at the center point of the first coarse of railroad ties.

Set three railroad ties on top of the first course of railroad ties in a U shape. The railroad ties on the side should overhang the back of the first course of ties by half the length. Drive 12-inch landscape timber screws to connect the side timbers to the railroad tie at the front of the U-shape, as well as to connect the second course of railroad ties to the first course.

Dig out the hillside to accommodate the remaining courses of railroad ties until you reach the top of the hill. Lay three railroad ties in a U-shape on the previous set of railroad ties, overlapping each new step by half the length. Drive landscape timber screws through the railroad ties to connect them.

Fill in the open spaces in the stair treads with your choice of concrete or gravel. Alternatively, you can fill in the space with additional pieces of railroad ties running either left to right or from front to back.

Can anyone tell me where I can purchase RR ties for my layout. I am using regular tubular track and want to add the extra wood ties. Thanks for any help that you can provide.

• Share on Facebook
• Share on Twitter
• Share on Pinterest
• Share on LinkedIn
• Share on Reddit
• Copy Link to Topic

• Report Topic
• Printer Friendly Format

Replies sorted oldest to newest

There is an advertiser in CTT that sells ties. Check there if nothing else but have you considered making your own? Nothing much simpler than setting us a jig and cutting a few feet of bass wood! Then get some double sided tape, stick them down, get a rag/brush and some stain and go to town! Good Sunday afternoon project. Gee thanks, now i have to go buy some wood! I was going to leave mine the way it was untill.

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

Bruce, I used 3/4″ by 1/4″ pine window screen molding. I was able to cut a lot of ties out of one strip. The molding is the correct width and height to match the metal ties attached to the track. I painted my ties black and used wood glue to secure them to the track bed. Here is how they turn out:

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

Rick, that’s very nice looking tubular track work!

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

Wardie Jay. They advertised in OGR at one time. In run 249 on page 14 is an article as part of the Smoke Signals department.

Located in Gap, Pa. the number is 717-687-6007. Jim Lyle’s Toy Trains.

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

I was considering doing adding more ties to my O27 track, do you have any good way to make a lot of ties in a short period of time?

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

I cut mine from pine on a table saw .I made a new plate for the blade so there wasn’t as much gap and set the rip fence to 1/4 .Once everything is set up and going you can really zing them off.

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

Try to not zing off your fingers!

I made most of the ties (scale) for under my rail using a band saw with 3 fences that I cobbled together for height, width, and length. A little time investment but all the scrap wood in the shop stopped being scrap and became ties.

• Copy Link to Reply

• Report Reply
• Printer Friendly Format

Try to not zing off your fingers!

I made most of the ties (scale) for under my rail using a band saw with 3 fences that I cobbled together for height, width, and length. A little time investment but all the scrap wood in the shop stopped being scrap and became ties.

Man makes a good point .Those of you out there that don’t know about shop safety or the proper way to use that new saw you just bought, may want to invest in a wood working or metal working class at your local community college .I need my digits .I can’t play the piano or banjo without them and it’d be a shame if after buying that new “Does it all in one thingy” to make stuff for your layout everybody now calls you nine fingers

Here’s a simple test to see if you qualify:

When using a table saw if you don’t know what a “Push Stick” is .

By: Harvey Birdman

06 December, 2010

Railroad ties are often discarded after repair work on railroads, which gives you a prime resource for making your own outdoor steps. The railroad ties are robust and weather-proof despite a lifetime of structural use and will make a great addition to your lawn or garden. Some care will have to be take to properly seat the ties, as just placing them in the ground can lead to significant drift when dirt is eroded by the weather.

Measure the distance that your want to terrace with steps. You will need three or four ties per vertical foot, depending upon how steep you want the stairs to be. Use a pencil and a pad of paper to record the different stairway measurements if your are placing steps at different points along a path and not placing steps the entire way.

Place a railroad tie down on a piece of cardboard and trace an outline. Cut this out and use it as a template to visualize how you will place the railroad ties. Place this template down on the ground where you think you want a tie. If you’re satisfied, then spray paint around the edges to put the template image on the ground.

• Railroad ties are often discarded after repair work on railroads, which gives you a prime resource for making your own outdoor steps.
• You will need three or four ties per vertical foot, depending upon how steep you want the stairs to be.

Place the template perpendicular along the side of the stairs to form a retaining barrier. This is to prevent the railroad ties from shifting over time due to rain and heat. Spray paint this template down as well. This is not a mandatory step but it is highly recommended.

Dig down inside the template outlines you sprayed down. Have a railroad tie handy to fit in until you have achieved the depth you want for the steps.The steps should be visible both on the front and top so that people can see that there is a step there. The perpendicular reinforcing ties can completely buried as their function is purely supportive, though they can be left exposed for decoration.

• Place the template perpendicular along the side of the stairs to form a retaining barrier.
• Have a railroad tie handy to fit in until you have achieved the depth you want for the steps.

Pour gravel down into the trenches before you put in the railroad tie. The gravel will help stabilize the tie. The gravel will move less than dirt, thus preventing drift over time.

One of the truly great looking improvements that anyone can make to their sloped landscape is in the railroad tie retaining wall. This type of wall has tremendous character built into it with the wide railroad ties, discoloration, gouges, and even history. Once the ground is prepared, the process of building a railroad tie retaining wall is very straightforward. It is labor-intensive, though, and does take a lot of time. Paying attention to the process is very important to make sure that the wall will remain standing for many years to come. Here are some of the mistakes to avoid when installing a railroad tie retaining wall.

Not Keeping the Ground Even

The most important part of the entire process of building your retaining wall is having an even surface to work from. Many people get in a hurry and rush to get the wall completed. They do not take the time to even out the ground that the ties will be sitting on. Take the extra time to use a stamper, and a level, to ensure that the ground is level and solid.

Not Keeping Ties Staggered

Working with railroad ties means that you will have to cut them to different lengths to stagger them as you continue to build the wall. This staggered layering will add a lot of strength to the wall as each joint between the ties is interlocked rather than just sitting on top of each other.

Not Using Anchor Ties

When building a retaining wall out of any material, and especially with railroad ties, you must have some sort of tie between the wall and the ground it is holding back. With railroad ties you should use a 4 foot length of a tie that goes straight into the hillside and is also resting on the wall itself. This will give the wall added strength by making use of the power of the hillside to hold it in place.

Not Using Rebar Through Ties

Some people do not realize that rebar must be used in the wooden railroad tie retaining wall just as much as it should be used with a mortar wall. The rebar works within the wall itself to give it added strength. You will need to take the time to drill into several pieces of the railroad tie and set some rebar into the hole.

Not Using a Water Barrier

A plastic felt that goes underneath the first course of railroad ties, and the back of the wall, must be used to keep water away from the wood. Even if it is treated, sitting in a puddle of water will eat its way through the treatment after a long period of time. Keep the wood protected by using a water barrier.

Not Using Stones or Pipes for Drainage

Before you begin laying out the railroad ties you should also put in place some drainage for water that comes down the hillside. This should be in the form of stones or a drainage pipe or both. This can be either directly under the railroad ties or a few inches below the ground where the ties will be positioned.

Railroad ties for landscaping? Yes, the same materials used for the railroads can also be used for the garden. These ties(also called sleepers) are durable and versatile materials for landscaping, and add a rustic charm to your outdoor spaces.

Their affordable price compared to other landscaping materials like stones and brick is undoubtedly one of the reasons why railroad ties are popular landscaping options. Perhaps one of the reasons for their low price is their mass availability. Some of them are also recycled from old railroads, which typically use hardwood such as oak.

Although inexpensive, they have never compromised quality. In fact, they are easier to work with because they already have the ribbon-like structure for wrapping plant boxes. Even a novice DIYer can easily finish a landscaping project with railroad ties. And, for those interested in “building green”, what an excellent way to incorporate recycled materials in to a project.

There’s no worry also about the general look of your outdoor because railroad ties can blend well with any landscape color. They can be painted, but they’re better left as natural as possible.

Contractors and homeowners alike are starting to realize the unlimited possibilities with railroad ties. They can be used on virtually everything in the landscape design. But the most common is for framing plant boxes. They are gorgeous borders for the lawns, too. Unlike other materials, ties can be stacked vertically, horizontally, even diagonally. They are also great for separating the irrigation areas for trees, flowers, and lawns. Use them also for separating landscape areas for easier maintenance. Mowing lawns bordered with these ties will be easier and faster.

Railroad ties can also be used with terraces and stairs as risers and decoration for the slope. Although a little work is necessary, sleepers can be cut into two-foot long materials for driveways and walkways. A fence will also be perfect with railroad ties. Cut ties into shorter pieces and they can be weaved like a basket and then be used as a nice and unique walkway.

There’s more. Railroad ties can define a beautiful effect of a water feature, protect the sprinklers, and even support a mailbox. The possibility doesn’t end here. Let your imagination run and you will come up with all kinds of creative ways to use railroad ties to enhance your property.

Everyone’s Favorite Railroad Tie Removal Crew!

The Stand Up Guys Junk Removal Crew can take care of all your railroad tie removal needs and more! From the lifting and loading , to disposing, we do it all. Why do we do it all? So that you don’t have too. Especially if you did all the hard work of removing the railroad ties from their original place! We don’t want you to have to move those heavy rascals again.

Railroad ties are one of the more common items that people call The Stand Up Guys about. Why? Because railroad ties are such a hassle to move around and/or get rid of yourself. They always take at least two guys to pick up (sometimes three) and you need an extra big truck to put them in. They are far to big to fit in the back of your average pick up truck.

All around, railroad ties are just a pain to have to deal with yourself. Of course, though, The Stand Up Guys Junk Removal Crew will manage all your railroad tie removal with ease. Here, we try to give you the best deal we can. We cut the cost for labor way down, and we get rid of railroad ties in bulk to keep the dump fees down.

Most of the time trying to complete a project like this on your own could be even MORE expensive than hiring a company. After renting a big truck, picking up all the railroad ties, hiring labor, and paying for the dump, you would wind up spending more money and time doing it yourself. So save yourself the annoyance and just call The Stand Up Guys; we’ll handle the rest.

Don’t worry about where you are either. The Stand Up Guys Junk Removal Crew travel all over! We have location in Metro Atlanta, GA – Tampa Bay, FL – Nashville, TN – Raleigh-Durham, NC and Dallas, TX .